This design uses the Hittie HMC363 prescaler chip. It divides the input by 8 so if 10GHz is put in the input the output is 1.25GHz. Component assy:To fit the ERA-1, (or NBB-310 for higher frequency performance)Drill a hole to allow the body of the device to drop down thru the pcbso the leads are …
Tag: 1.2GHz
May 02
1.2GHz MMIC Amplifer using AH-1 MMIC
This amplifier can be used as a driver for a PA module or as PA by itself. 10dBm (10mW) input should give about 23dBm (200mW) output. It is constructed on standard double sided FR-4 board and supply is 12v. Higher Gain Version This high gain amplifier will provide 23dBm output across the 23cm band. It …